Service page

Services
Floris van Bommel
Shorten belts

With the belt punch supplied with your belt, you can easily shorten your belt to the exact right size. The video below shows you how to do this. Floris van Bommel belts are available in 3 sizes: 95cm, 105cm and 115cm. The centimetres correspond to the hip circumference. If the hip measurement is 102 cm, for example, both the 105 cm and the 115 cm belts can be easily adjusted to the perfect length.


If you have any further questions, please contact our customer service via email: webshop@florisvanbommel.com or phone: +31 (0)13 51 36 940.

Shortening instructions

  • Thread the belt through the loops in your trousers. Tighten the belt so that it feels comfortable. Measure the distance between the outer edge of the buckle and the middle of the five holes.
  • Loosen the screw and remove the buckle.
  • Draw a vertical line to mark the distance (x) you have measured from the end of belt where you just removed the buckle.
  • Cut the belt along the line.
  • Use the end that you have cut off to determine the position of the new hole.
  • Use the hollow punch to punch a new screw hole at the marked point.
  • Mount the buckle part back onto the belt using the screw.

    • Contact form

    Please fill in the contact form as completely as possible so that we can process and answer your question. On working days, we try to respond to order-related questions within 24 hours. Other enquiries will be answered within 2 working days.

    Attachment (optional)

    • The attachment should meet the following requirements:
    • File should be JPG, PNG or GIF
    • File size is max. 3 MB
    • You can only upload one file at a time. Mail for multiple files to webshop@florisvanbommel.com
    Send

    Your message has been sent.

    There was an error, please try again later!